Publications

With K. George, J. K. Donald, and R. J. Bucci, "Development of a Corner-Notched, Open-Hole Specimen for Material Evaluation," in Fatigue Testing and Analysis under Variable Amplitude Loading Conditions, STP 1439, P. C. McKeighan and N. Ranganathan, Eds. American Society for Testing and Materials, 2002. Abstract

"Failure Assessment Diagrams" in Failure Analysis and Prevention, ASM Handbook, Vol. 11, 2002, pp 243-249. Abstract

"Steel for Construction" in Encyclopedia of Materials Science and Technology, Pergamon / Elsevier Science, Ltd., 2001, pp 1564-1570. Abstract

"Fracture Mechanics of Mechanically Fastened Joints - a Bibliography" in Structural Integrity of Fasteners, Second Volume STP 1391, P. M. Toor, Ed., American Society for Testing and Materials, 2000, pp 204-214. Abstract

With S. V. Petinov and A. K. Thayamballi, "The Similitude of Fatigue Damage Principal: Application in S-N Curve-Based Fatigue Design", Proceeding of the Symposium - Fatigue Design 1998, Espoo, Finland, 1998. Abstract

"Fatigue and Fracture of Ship Structures" in Prevention of Fracture in Ship Structure, Marine Board, National Research Council, Washington, 1997. Abstract

Contributed to Fatigue Design Handbook, 3d Ed., R. C. Rice, Ed., Society of Automotive Engineers, AE-22, 1997.

"Effect of Cold-Forming on the Strain Controlled Fatigue Resistance of Automotive Steels" in Recent Developments in Fatigue Technology, R. A. Chernenkoff and J. J. Bonnen, Eds., Society of Automotive Engineers, 1997, pp 121-134. Abstract

With W. G. Reuter, K. L. Kenney and D. K. Matlock, "Fracture Initiation in Local Brittle Zones in Weldments of Quenched and Tempered Structural Alloy Steel Plate" in Fatigue and Fracture Mechanics, 28th Volume, STP 1321, J. H. Underwood, B. D. Macdonald and M. R. Mitchell, Eds., American Society for Testing and Materials, 1997, pp. 427- 449. Abstract

With Y-Y. Wang and M. T. Kirk, "Inference Equations for Fracture Toughness Testing: Numerical Analysis and Experimental Verification" in Fatigue and Fracture Mechanics, 28th Volume, STP 1321, J. H. Underwood, B. D. Macdonald and M. R. Mitchell, Eds., American Society for Testing and Materials,1997, pp. 69-484. Abstract

Discussion to "Titanic - The Anatomy of a Disaster," by W. H. Garzke, Jr., D. K. Brown, A. D. Sandiford, R. J. Woodward, D. Wood, D. Livingston, and P. K. Hsu Proceedings of the Annual Meeting of the Society of Naval Architects and Marine Engineers, 1997.

Discussion to "The Titanic and Lusitania: A Final Forensic Analysis," by W. H. Garzke, Jr., D. K. Brown, A. D. Sandiford, R. J. Woodward, and P. K. Hsu Marine Technology, v. 33, no. 4, October 1996, pp. 241-289.

"Fatigue of Mechanically Fastened Joints" in Fatigue and Fracture, Vol. 19, ASM Handbook, American Society for Metals, 1996, pp 287-294. Abstract

"Engineering Approaches to Elastic-Plastic Failure Assessment," Bethlehem Steel Corporation, Bethlehem, Pa., November 7, 1994. Abstract

"Fracture Toughness of Weldments for Offshore Structures," Standardization News, v. 21, no. 3, March 1993, pp 34-37. Abstract

"Effect of Cold-Forming on the Strain Controlled Fatigue Resistance of Automotive Steels," Transactions of the Society of Automotive Engineers, v. 101, Section 5, 1992, pp 554-566. Abstract

"The Fatigue Strength of Cold-Formed Automotive Steels," Automotive Technology International '93, Sterling Publications Ltd., London, 1993, pp 72-79. Abstract

"Strain-Controlled Fatigue Resistance of Automotive Steels," Automotive Engineering , v. 100, No. 12, December 1992, Society of Automotive Engineers, pp 27-30. Abstract

"Modelling of the Fatigue Resistance of Single-Lap Spot-Welded Steel Sheet," Annual ASTM Fatigue Lecture, IIW - 1469 - 92, May 1992. Abstract

With H. G. Pisarski and M. G. Dawes, "Residual Stresses and Fatigue Precracking Techniques for Weldment Fracture Toughness Specimens," Journal of Testing and Evaluation, v. 20, no. 6, November 1992, pp 416-423. Abstract

"Structural Integrity Analysis of a Heavy Rolled Structural Section," presented at the International Institute of Welding Conference on Fitness for Purpose of Welded Structures, Key Biscayne, Florida, October 1991. Abstract

Review of book, "Materials for Marine Systems and Structures," D. F. Hasson and C. R. Crowe, Eds., Academic Press, 1988, in Journal of Testing and Evaluation, v. 17, no. 3, May 1991, pp 260-261.

Contributed to Fatigue Design Handbook, 2d Ed., R. C. Rice et al, Eds., Society of Automotive Engineers, AE-10, 1987.

"Observations, Predictions, and Prevention of Fatigue Cracking in Offshore Structures" in Case Histories Involving Fatigue and Fracture Mechanics, STP 918, C. M. Hudson and T. P. Rich, Eds., American Society for Testing and Materials, 1986, pp 136-152. Abstract

With G. A. Miller and T. R. Sharon, "A Compilation of Strain-Cycle Fatigue Data for Bethlehem Steel Sheet and Plate Grades," Bethlehem Steel Corp., August 5, 1986, Second Edition.

"Fatigue of Notched Steel Sheet and Plate in an Aqueous Environment," Proceedings of the 1986 International Conference on Fatigue of Engineering Materials and Structures, Vol. II, Institution of Mechanical Engineers, London, 1986, pp 360-371. Abstract

"Steel for Construction" in Encyclopedia of Materials Science and Engineering, M. B. Beever, Ed., Pergamon Press, New York, 1986.

"Hotspot Stress Approach to Fatigue Design of Weldments," Bethlehem Steel Corporation, Bethlehem, Pa., March 4, 1985.

With Z. Zimerman, "Axial Corrosion Fatigue of Wire Rope," Proceedings of the Offshore Technology Conference, Houston, 1985, pp 51-56. Abstract

With G. A. Miller, "Strain-Cycle Fatigue of Sheet and Plate Steels I: Tests of Notched Specimens" in High Strength Steel for Automotive Use, P-124, Society of Automotive Engineers, pp 43-53, 1983. Abstract

With G. A. Miller, "Strain-Cycle Fatigue of Sheet and Plate Steels II: Some Practical Considerations in Applying Strain-Cycle Fatigue Concepts" in High Strength Steel for Automotive Use, P-124, Society of Automotive Engineers, pp 35-41, 1983. Abstract

With G. A. Miller, "Strain-Cycle Fatigue of Sheet and Plate Steels III: Test Method Development and Data Presentation" in High Strength Steel for Automotive Use, P-124, Society of Automotive Engineers, pp 23-31, 1983. Abstract

With Z. Zimerman, "Bend-Over-Sheaves Fatigue Testing of 2-inch Diameter Marine Rope," Bulletin 45 of the International Organization for the Study of the Endurance of Wire Ropes, July 1983, Turin, Italy. Abstract

"Constant Amplitude Fatigue Life Assessment Models," Transactions of the Society of Automotive Engineers, v. 91, 1983, pp 2337-2350. Also in Proceedings of the SAE Fatigue Conference, P-109, Society of Automotive Engineers, pp 75-84, 1982. Abstract

"Stress Analysis," Transactions of the Society of Automotive Engineers, v. 91, 1983, pp 2327-2336. Also in Proceedings of the SAE Fatigue Conference, P-109, Society of Automotive Engineers, pp 119-132. Abstract

"State of the Art of Design and Analytical Models for Fatigue of Weldments" Proceedings of the International Conference on Fitness for Purpose in Welded Construction, May 18-20, 1982, American Welding Society, 1982, pp. 41-55. Abstract

With G. A. Miller, T-T. Shih, and C. E. Swenson, "Effect of Discontinuities on Low-Cycle Fatigue Behavior of NiMoV Rotor Forging Steel" in Low-Cycle Fatigue and Life Prediction, ASTM STP 770, C. Amzallag, B. N. Leis, and P. Rabbe, Eds., American Society for Testing and Materials, 1982, pp. 227-253. Abstract

"Evaluating the Effect of Residual Stresses on Notched Fatigue Resistance," Materials, Experimentation, and Design in Fatigue - Proceedings of Fatigue '81, Westbury Press, Guildford, England, 1981, pp. 273-295. Abstracted in Residual Stress Effects in Fatigue, ASTM STP 776, American Society for Testing and Materials, 1982, p. 32. Abstract

"Effect of Various Processing and Metallurgical Parameters on the Fatigue Resistance of Carbon Steel Wire," , Bulletin 39 of the International Organization for the Study of the Endurance of Wire Ropes, April 1981, Turin, Italy, pp. 12-28. Abstract

"ASTM Committee E-9 on Fatigue: Past and Present," Standardization News, v. 8, no. 2, February 1980, pp 8-10 and p. 62. Abstract

"Fatigue Properties of Welded Roller-Quenched and Tempered RQ Steels," Transactions of the Society of Automotive Engineers, v. 88, Section 2, 1979, pp 1905 - 1914. Abstract

"The Development and Application of Fatigue Data for Structural Steel Weldments" in Fatigue Testing of Weldments, STP 648, D. Hoeppner, Ed., American Society for Testing and Materials, 1978, pp 3-21. Abstract

"Bibliography on Fatigue of Weldments," Welding Journal, v. 57, June 1978, pp 178-182. Abstract

With D. A. Demo, "Fatigue Cracking in Welded Crane Runway Girders: Causes and Repair Procedures," Iron and Steel Engineer, v. 55, no. 4, April 1978, pp 52-56. Abstract

"Fatigue Life Extension of Riveted Connections," Journal of the Structural Division, Proceedings of the American Society of Civil Engineers, v. 101, ST12, December 1975, pp 2591-2608. Discussion and Closure, Journal of the Structural Division, Proceedings of the American Society of Civil Engineers, v. 103, ST7, July 1977, pp 1495-1496. Abstract

"Brittle Fracture," Chapter 15 in Structural Steel Design L. Tall, Ed., Ronald Press, New York, 2d Ed., 1974, pp 507-518.

"Fatigue," Chapter 16 in Structural Steel Design, L. Tall, Ed., Ronald Press, New York, 1974, 2d. Ed., pp 519-551.

"Some Significant Parameters in the Fatigue Properties of Weld Joints," Welding Journal, v. 34, May 1969, pp 213-220. Awarded the Davis Silver Medal of the American Welding Society. Abstract

"An Examination of the Locati Estimation of the Fatigue Limit," Materialprüfung, v. 11, no. 4, April 1969, pp 109-114. Abstract

Review of book "Fatigue of Welded Structures" by T. R. Gurney, Cambridge University Press, 1968, Materials Research and Standards, v. 9, no. 3, March 1969, p 36.

"Procurement and Analysis of Structural Fatigue Data," Journal of the Structural Division, Proceedings of the American Society of Civil Engineers, v. 95, ST7, July 1969, pp 1533-1551. Abstract

"Fatigue Data for Plain and Welded Structural Steels," Bethlehem Steel Corp., Bethlehem, Pa., 1968.

"Service Histories and Laboratory Testing," Journal of the Structural Division, Proceedings of the American Society of Civil Engineers, v. 94, ST12, December 1968, pp 2699-2712. Abstract

"Correlation of Fatigue Limit with True Stress - True Strain Behavior," Materials Research and Standards, v. 7, no. 9, September 1967, pp 390-392. Abstract

A New Specimen for Fatigue Testing Longitudinal Fillet Weldments," Proceedings ASTM, v. 65, 1965, pp 729-735. Abstract

"Fatigue Strength of Longitudinal Weldments in Constructional Alloy Steel," Welding Journal, v. 44, October 1965, pp 458-465. Abstract

Discussion to "A New Stress-Corrosion Cracking Test for High-Strength Alloys" by B. F. Brown, Materials Research & Standards, V. 6, no. 3, March 1966, p. 133

Discussion to "A Statistical Approach to the Analysis of Fatigue Failure of Prestressed Concrete Beams," by W. J. Venuti, Journal of the American Concrete Institute, v. 63, no. 6, June 1966, pp 1803-1895.

"Fatigue," Chapter 16 in Structural Steel Design, L. Tall, Ed., Ronald Press, New York, 1st Ed., 1964.

"A Study of the Fatigue Resistance of Longitudinal Fillet Weldments in Steel," Dissertation Abstracts, v. 25, no. 1, 1964, PhD Dissertation, Lehigh University, 1963. Abstract

Back to Meet Dr. Reemsnyder